PrivTab

Калькулятор підмереж

Розрахувати IP-підмережу

Працює в браузері · Без завантаження

Сам інструмент та інструкції на цій сторінці поки англійською. Працює він так само: усе відбувається у вашому браузері.

Network

  • Ніщо не залишає ваш пристрій
  • Сервер не обмежує розмір файлів
  • Без реєстрації, без водяного знака
  • Безкоштовно

How to calculate a subnet

  1. Enter an address and prefix, like 192.168.1.10/24, or an address and mask, like 10.0.0.1 255.255.0.0.
  2. Read the network, broadcast, host range and masks.
  3. To divide the network, choose the size of each smaller subnet.

Common IPv4 prefixes

PrefixSubnet maskUsable hosts
/8255.0.0.016,777,214
/16255.255.0.065,534
/24255.255.255.0254
/26255.255.255.19262
/28255.255.255.24014
/30255.255.255.2522
/31255.255.255.2542 (point-to-point links)
/32255.255.255.2551 (a single address)

Good to know

  • Two addresses of every IPv4 subnet are reserved: the network address and the broadcast address. /31 and /32 are the exceptions.
  • Private ranges (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) are recognised, along with loopback, link-local and carrier-grade NAT.
  • IPv6 addresses are shown in their shortest standard form (RFC 5952) and in full.

Поширені запитання

What is a wildcard mask?

The opposite of the subnet mask (0.0.0.255 for /24). Cisco access lists and OSPF use it.

Is anything sent anywhere?

No. Everything happens in your browser, and the page is blocked from uploading anything.