PrivTab

Subnet calculator

Kalkulahin ang IP subnet

Tumatakbo sa iyong browser · Walang upload

Nasa Ingles pa sa ngayon ang tool na ito at ang mga tagubilin sa pahinang ito. Pareho itong gumagana: lahat ay tumatakbo sa iyong browser.

Network

  • Walang umaalis sa iyong device
  • Walang limitasyon sa laki mula sa server
  • Walang sign-up, walang watermark
  • Libre

How to calculate a subnet

  1. Enter an address and prefix, like 192.168.1.10/24, or an address and mask, like 10.0.0.1 255.255.0.0.
  2. Read the network, broadcast, host range and masks.
  3. To divide the network, choose the size of each smaller subnet.

Common IPv4 prefixes

PrefixSubnet maskUsable hosts
/8255.0.0.016,777,214
/16255.255.0.065,534
/24255.255.255.0254
/26255.255.255.19262
/28255.255.255.24014
/30255.255.255.2522
/31255.255.255.2542 (point-to-point links)
/32255.255.255.2551 (a single address)

Good to know

  • Two addresses of every IPv4 subnet are reserved: the network address and the broadcast address. /31 and /32 are the exceptions.
  • Private ranges (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) are recognised, along with loopback, link-local and carrier-grade NAT.
  • IPv6 addresses are shown in their shortest standard form (RFC 5952) and in full.

Mga madalas itanong

What is a wildcard mask?

The opposite of the subnet mask (0.0.0.255 for /24). Cisco access lists and OSPF use it.

Is anything sent anywhere?

No. Everything happens in your browser, and the page is blocked from uploading anything.