PrivTab

சப்நெட் கால்குலேட்டர்

IP சப்நெட்களைக் கணக்கிடவும்

உங்கள் உலாவியில் இயங்குகிறது · பதிவேற்றம் இல்லை

இந்தக் கருவியும் இந்தப் பக்கத்தின் வழிமுறைகளும் தற்போது ஆங்கிலத்தில் உள்ளன. அது அதே போல் வேலை செய்கிறது: எல்லாம் உங்கள் உலாவியிலேயே இயங்குகிறது.

Network

  • எதுவும் உங்கள் சாதனத்தை விட்டு வெளியேறாது
  • சேவையகத்திலிருந்து அளவு வரம்பு இல்லை
  • பதிவு இல்லை, வாட்டர்மார்க் இல்லை
  • இலவசம்

How to calculate a subnet

  1. Enter an address and prefix, like 192.168.1.10/24, or an address and mask, like 10.0.0.1 255.255.0.0.
  2. Read the network, broadcast, host range and masks.
  3. To divide the network, choose the size of each smaller subnet.

Common IPv4 prefixes

PrefixSubnet maskUsable hosts
/8255.0.0.016,777,214
/16255.255.0.065,534
/24255.255.255.0254
/26255.255.255.19262
/28255.255.255.24014
/30255.255.255.2522
/31255.255.255.2542 (point-to-point links)
/32255.255.255.2551 (a single address)

Good to know

  • Two addresses of every IPv4 subnet are reserved: the network address and the broadcast address. /31 and /32 are the exceptions.
  • Private ranges (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) are recognised, along with loopback, link-local and carrier-grade NAT.
  • IPv6 addresses are shown in their shortest standard form (RFC 5952) and in full.

அடிக்கடி கேட்கப்படும் கேள்விகள்

What is a wildcard mask?

The opposite of the subnet mask (0.0.0.255 for /24). Cisco access lists and OSPF use it.

Is anything sent anywhere?

No. Everything happens in your browser, and the page is blocked from uploading anything.